This Lava Pixel V2 [3GB RAM] Firmware, Stock ROM file can be used with any service tools capable of Flashing Stock ROM file on Lava Android devices.
Stock firmware are mostly needed to either upgrade your Lava Pixel V2 [3GB RAM], downgrade it or, to simply flash the phone to correct certain software issues or malfunctions on the phone. Here on this page I have contained the download link for the complete Lava Pixel V2 [3GB RAM], Stock ROM file which can be used to flash factory OS back to your Lava Pixel V2 [3GB RAM].
How to Download Stock Firmware and Flash Lava Pixel V2 [3GB RAM] with the Stock ROM
1. Download SP Flash Tool from and install it on your PC. If you don't have MTK Android drivers installed on your PC yet, you must install it too. Download VCOM Drivers
2. Free Download your
Lava Pixel V2 [3GB RAM] firmware, Stock ROM File from here.3. Open the SP Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate
flash_tool.exe application and then; double-click it to lunch the program.
4. Go to the folder where you downloaded the Lava Pixel V2 [3GB RAM] Stock ROM and open it. It is compressed in a ZIP File, simply decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, select
Scatter Loading. A window should open. Using the browse button, navigate to the folder where you unzipped the Lava Pixel V2 [3GB RAM] stock ROM and then select "
MTXXXX-ANDROID-SCATTER", from there.
Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool will load all the partitions in the Lava Pixel V2 [3GB RAM] stock ROM you downloaded. From the list,
mark all the partitions
EXCEPT these three (3):
Preloader,
UserData and
CACHE.
7. Now, select
Download on SP Flash Tool.
8. Put off your Lava Pixel V2 [3GB RAM] or remove battery from it and re-insert the battery again. Connect your Lava Pixel V2 [3GB RAM] Mobile Phone to the PC and then tap the
Power button once.
9. For few seconds, your Windows PC will install the necessary drivers for the flashing operation and then, the flashing operation will commence promptly.
10. When the flashing operation completes, SP Flash Tool will display a green PASS circle. You may then disconnect your phone from the PC.
CONGRATULATIONS! You have successfully flashed your Lava Pixel V2 [3GB RAM] to its factory defaults.
NOTE: if you encounter any errors while flashing your Lava Pixel V2 [3GB RAM] using SP Flash Tools, see here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash Lava android devices, see here:
How to Flash Lava Android Device: Step by Step with Pictures